If you have recently installed a new battery in your Dodge, you may need to locate and enter a radio code before you can use the stereo or sound system again. The exact location of this code may vary by model, but on most Dodge models, you will find the radio code on a sticker in the glove box and in the owner’s manual.
You may never have heard of it, but your Dodge’s sound system has a simple security measure known as a radio code that deters potential thieves. This is a handy feature, but you will need to know this code when you replace your Dodge’s battery —and you’ll also need to know where to find it.
Luckily for you, this site has everything you need to easily find your Dodge radio code! Forget the complicated guides—right here, you’ll get straightforward info on unlocking your audio system after a battery change. Access your Dodge radio code quickly and hassle-free with us!
Why your Dodge needs a radio code
The first time you see a “code” message flash up on your Dodge’s radio, you may be a little confused — after all, you’ve never needed a code to listen to music before, have you? Why should this time be any different?
Quite simply, if your vehicle’s battery is dead or has been replaced, your radio will ask for a code as a security measure to deter potential thieves from the stereo. This is a useful feature if you don’t have insurance for your sound system.
Of course, if you don’t have the code to hand or don’t know it by heart, this security measure can quickly become a nuisance as you won’t be able to use the radio again until you have entered the code.
More: Get Your Blaupunkt Radio Code Now : Fast & Easy Generator
Quick Guide to Finding Your Dodge Radio Code
Where to find your Dodge radio code generally depends on your exact model and model year. In most cases, however, you will find the Dodge radio code on a small card in your owner’s manual or on a sticker in the glove box. It is usually labeled “Anti-Theft Radio Code” and printed next to the radio’s serial number.
A radio code only ever consists of five characters — anything with more or fewer characters is the wrong code.
More: How To Find Your Volkswagen Radio Code
Easy Steps to Look Up Your Dodge Radio Code
If you can not find the map in your owner’s manual or on the sticker in the glove box, you can still find your Dodge’s radio code — it just takes a few extra steps.
First, you’ll need to know both the vehicle identification number (VIN) and the radio’s serial number— – see below for where to find these numbers:
VIN: Your Dodge’s VIN — a 17-digit alphanumeric sequence – —can be found in several places. The most obvious is on a small plaque on the driver’s side of the dashboard, which should be visible through the windshield. You can also find the VIN in your vehicle documents and on your insurance card.
Serial Number: If you have an older model Dodge, you will need to remove the radio to find the radio’s serial number. We recommend that you have this work done by a professional to avoid damaging the stereo.
If you have a newer Dodge model, you may be able to read the radio serial number from the radio display —however, the exact instructions for this will depend on your model and year of manufacture.
How to Enter your Dodge Radio Code
- Turn on the radio, the screen should display “CODE“
- To enter the code, you only need to use the preset buttons 1-4.
- Start with button 1 and press it several times until the correct first digit is displayed on the screen
- Then repeat the same procedure with buttons 2, 3 and 4 until the correct code is displayed.
- If you go past the number you want, keep pressing until you have gone past 9 and go back to 0.
- The enter button on Dodge radios varies from model to model, but on 90% of radios, press and hold the “ENTER” or “OK” button for 2-5 seconds to confirm the code in the radio. Follow this youtube guide for more info..